Admin Makerspace

ACON has a few minor changes. The Red indicator on the front panel will always be on when the system has power (+12VDC supply operating).  It will not go out when the EXIT button is pressed, as it had prior to today. Added a Red light to the back of the box, next to the […]

On April 8th 2015 the IRS granted Melbourne Makerspace status as a charitable organization. For specifics on the government rules relating to this status see: http://www.irs.gov/pub/irs-pdf/p4221pc.pdf   Special thanks goes to member Gene Wade for making this possible. Mr. Wade, thank you.

We now have a doorbell for use by visitors and other people without an RFID card key.

Press the EXIT button (either one) to open the door from the inside. If the EXIT button fails to release the door within one second of pressing an exit button, you may: 1) Deactivate the magnet by flipping the switch down on the ACON box. 2) Pull the power plug from the bottom of the

ACON – Goes Live Monday April 13, 2015, 5:00 PM After that, (brass) key access will not be possible. Only RFID cards will work. You must have an RFID card after that date and time. ALSO, to exit the building and not plaster your face on the door, you must press the EXIT button on